The short answer: honing straightens the edge you already have, and it removes little or no metal. Sharpening grinds away steel to create a new edge. Hone often, and sharpen when honing stops bringing the edge back. They are two different jobs, and a knife needs both over its life.
What honing does
The very edge of a knife is thin enough to bend. After a few uses on a cutting board, the edge can fold slightly to one side, even though no steel has been lost. The knife feels duller because the edge is no longer pointing straight.
A honing rod, often called a honing steel, nudges that bent edge back into line. A smooth steel rod removes very little metal, and a ceramic rod may remove a bit more. Either way, honing is maintenance. It is not a way to make a worn-out edge new again.
Honing is gentle and quick, and many cooks do it before or after cooking.
What sharpening does
Over months and years, the edge wears away. Once the steel at the edge is rounded off, bending it back into line does not help, because there is nothing sharp left to straighten.
Sharpening fixes that by removing metal from both faces of the blade until they meet again in a fresh, narrow edge. That is why sharpening uses abrasives: whetstones, ceramic stones and guided tools all work this way. Because it removes steel, it is something you do only when you need to, not before every meal.
Side by side
| Honing | Sharpening | |
|---|---|---|
| What it does | Realigns the existing edge | Removes steel to form a new edge |
| Metal removed | Little or none | Yes |
| How often | Often, before or after use | Only when honing no longer helps |
| Tool | Honing rod | Whetstone, guided sharpener or similar |
| Fixes a truly dull knife? | No | Yes |
How to tell which one your knife needs
Try honing first, then test the knife.
- Hone the knife. Use a few light strokes on each side at the knife's angle.
- Test it. Slice a ripe tomato or a sheet of paper.
- If it cuts cleanly, the edge was only bent. You are done.
- If it still crushes, slips or snags, honing did not bring the edge back. The knife needs sharpening.
The rule is simple: hone often, and sharpen when honing stops working.
A mistake that trips people up
A standard honing rod is often mistaken for a sharpener. It does not sharpen. If you hone a knife for months and it still feels dull, the rod is not failing. The edge has simply worn past what honing can restore.
The reverse is also true. A freshly sharpened knife can stay sharp longer if you hone it now and then. Sharpening too often wastes steel, so keeping the edge aligned with a rod is one way to put it off.
Where a rolling sharpener fits
A rolling sharpener is a sharpening tool, not a honing rod. The two jobs go together: you hone to keep the edge straight between sharpenings, and you sharpen when the edge has worn.
Edgekeep is a rolling knife sharpener. It is a roller with four grits (240, 400, 600 and 1000, coarse to fine), plus a magnetic angle block that holds the blade at the angle you set. The block sets 15, 18, 20 or 22 degrees. You roll the roller along the edge, then do the other side, and move to a finer grit to finish.

It is built for straight-edge kitchen knives, such as a chef, santoku or utility knife, and it is not for serrated knives. When it is time to sharpen, you can see the Edgekeep rolling knife sharpener. Keep your honing rod for the days in between.
For more on spotting a tired edge, see how to tell if your knife needs sharpening and how often.
Frequently asked questions
Does honing sharpen a knife?
Not in the usual sense. Honing realigns an edge that has bent out of line, which can make a knife feel sharper. It removes little or no steel, so it cannot restore an edge that has worn down.
How often should I hone my knife?
Many cooks hone before or after each cooking session, or every few uses. There is no strict schedule. If the knife feels a little off, a few light strokes are easy insurance.
Can I sharpen a knife with a honing rod?
Not with a standard steel honing rod. It keeps the edge aligned, but it does not remove enough steel to make a new edge. For a dull knife, use a sharpening tool such as a whetstone or a guided sharpener.