Edgekeep rolling knife sharpener with a magnetic angle block marked 15, 18, 20 and 22 degrees

Electric vs. Manual Knife Sharpener: Which Should You Choose?

The short answer: an electric sharpener is fast and needs almost no skill, but it often removes more metal, gives you less control, is louder and takes counter space. Manual sharpeners are quiet and need no power, and the ones where you choose the angle give you more control over how much steel comes off. If you want the most control, use a whetstone. If you want simple and predictable, a guided manual tool is a good middle ground.

What each type is

There are four common kinds of sharpener.

  • Electric: a motor spins the abrasive, and you pull the knife through slots that set the angle.
  • Manual pull-through: you draw the knife through a small handheld unit with fixed abrasive slots.
  • Whetstone: a flat abrasive block that you move the knife across by hand.
  • Guided manual: a hand-operated tool that holds the angle for you while you do the work.

Electric sharpeners

What is good about them

  • They are fast and need little practice to get a usable edge.
  • The guides do the angle work for you, so there is little to learn.
  • They suit people who sharpen rarely and want a result without practice.

What is not so good

  • They tend to remove more steel than a careful hand method, because motorized abrasives grind quickly. Over many years, that can shorten the life of a good knife.
  • You have little say over the angle. Many units are set for one or two angles, which may not match your knife.
  • They are louder, and they take up counter or cabinet space.
  • It is harder to go easy on very thin or delicate blades.

Manual pull-through sharpeners

What is good about them

  • They are small, simple and quiet, and they need no power.
  • You can use one right away with no setup.

What is not so good

  • The angle is fixed by the slots, so you get one angle whether or not it fits your knife.
  • Many are designed to remove steel quickly, so they can be rough on an edge.
  • The finish is usually less refined than what you can get with a stone.

Whetstones

A whetstone gives you the most control of any option. You choose the angle, the grit and how much steel to remove. With practice, you can get an excellent edge and treat the knife gently.

The catch is skill. You must hold a steady angle by hand through every stroke, and that takes practice. A few degrees of wobble changes the edge you are making. Stones also need soaking or flattening, depending on the type, and they take more setup than any other option.

Guided manual sharpeners

A guided manual sharpener sits between the two. You still do the work by hand, so you keep control of how much metal you remove. But the tool holds the angle, so you skip the hardest part of using a stone.

A rolling sharpener with an angle block is one example of this idea.

How to decide

Ask yourself three questions.

  1. How much do you care about your knives? If you own one good knife you want to last for decades, favor methods that remove less steel and let you set the angle.
  2. How much patience and practice do you want to give it? If the answer is very little, an electric or a guided tool will get you there sooner than a stone.
  3. How much space and noise can you live with? Electric units take room and make noise. Manual tools do not.

If you are still unsure, weigh how much control you want against how much practice you are willing to give.

Where Edgekeep fits

Edgekeep is a rolling knife sharpener that you work by hand: a roller with four grits (240, 400, 600 and 1000, coarse to fine), plus a magnetic angle block that holds the blade at the angle you set. The block gives you 15, 18, 20 or 22 degrees, so the angle is chosen to suit the knife and then held for you. You roll the roller along the edge, then do the other side.

Edgekeep magnetic angle block marked with the four angles: 15, 18, 20 and 22 degrees

It is built for straight-edge kitchen knives, such as a chef, santoku or utility knife. It is not for serrated knives. You can see the full details on the Edgekeep rolling knife sharpener page.

If you are weighing it against stones, see rolling knife sharpener vs. whetstone for beginners.

Frequently asked questions

Are electric knife sharpeners bad for knives?

Not automatically, but many remove more steel than a careful hand method, and most give you little control over the angle. For an inexpensive knife that is fine. For a knife you want to keep for years, a method that removes less steel is usually the better choice.

Which type is easiest for a beginner?

Electric sharpeners need the least practice, because the slots set the angle. A whetstone takes the most practice, since you must hold the angle yourself.

Do I still need to hone my knife?

Yes. Honing realigns the edge between sharpenings, and no sharpener replaces it. You generally sharpen when honing no longer brings the edge back, or when the edge is chipped.

Back to blog